Platinum Series UPS 1Ph 1-3kVA

True On-line Double Conversion Diamond Plus UPS Series has been designed to backup various applications. Small data centers, Medical Lab equipment, light industrial facilities all require rugged UPS equipment.


UPS Brochure
1-1.5kVA UPS Drawing
2kVA UPS Drawing
3kVA UPS Drawing
UPS Install / Operation Manual
Bypass Switch Drawing
Platinum UPS Series Battery Backup Time Run Chart 1kVA and 1.5kVA
Platinum UPS Series Battery Backup Time Run Chart 2kVA and 3kVA


  • Extended Battery Cabinets:  All Platinum Series units are supported with additional battery backup by using the extended battery cabinets. Extended battery cabinets are optional and allow users to have extended run-times dependent on requirements.
  • Communication Cards:  Available communication cards include the following: Standard SNMP Protocol, MODBUS Communication and WiFi Communication.
  • Conformal Coated Boards:  Conformal coated boards allows for the Platinum Series to be used in “light industrial” applications. Boards that are conformal coated include the Main PCB, Communication Card, Charger, and Control boards.
  • Warranty:  Platinum series comes with a two year warranty on the electronics, one year warranty on the batteries. For additional warranty options please contact the factory.


1kVA 1.5kVA 2kVA 3kVA
Capacity 1kVA / 1kW 1.5kVA / 1.5kW 2kVA / 2kW 3kVA / 3kW
Input Voltage (range) 90-150VAC
Phase 1 Phase
Frequency Range 50/60Hz +/-4%
Power Factor ≧ 0.95 at 100% Load
Input THD <9.0%
Output Voltage 100/110/115/120VAC
Phase 1 Phase
Frequency Sync Range 46Hz ~ 54Hz @ 50Hz System, 56Hz ~ 64Hz @ 60Hz System, (Batt Mode) +/- 0.1% Hz
Output THD ≦ 2% at 100% Linear Load / ≦ 4% at 100% Non-linear Load (PF≥0.8)
Voltage Regulation ± 1%
Overload – AC Mode 100%~110% for 1hr / 110-130% for 1min / >130%: 1sec
Overload – Battery Mode 100-110%: 30sec / 110-130%: 10sec / >130%: 1sec
Current Crest Ratio 3:1 Max
AC Mode 84 – 86%
Battery Voltage 36VDC 72VDC
Battery Backup Time @ 3.5 minutes at full load
Charger Current 1.0A
Recharge Time 7 hours at 90%
Internal Batteries 3 x 9AH 3 x 9AH 6 x 7AH 6 x 9AH
Dimensions WxDxH 17.25″W x 16.15″D x 3.40″H 17.25″W x 24.80″D x 3.40″H
Weight (lbs) 37 37 83 83
Operating Temperature 0-40°C (the battery life will decrease when > 25°C)
Operating Humidity <95% non-condensing
Operating Altitude ft (m) 2,000ft
Heat Dissipation (BTU/Hr) 520 877 1171 1500
Acoustic Noise Level 55-60dB at 1 meter
RS-232 or USB Supports Windows® 2000/2003/XP/Vista/2008/7/8/10, Linux, Unix, and MAC
MODBUS Card Power Management with MODBUS communication
Optional SNMP Power management from SNMP manager and web browser
Safety UL 1778 / IEC 61000-4-3
Environmental FCC Part 15J, Class A